HXYR-5型空預器吹灰器

所屬分類：

鍋爐吹灰器

公司產品廣泛應用于火電、冶金、化工、造紙、垃圾處理、硫化床鍋爐及其它余熱鍋爐。目前公司已是哈鍋、上鍋、武鍋、杭鍋、錫鍋、川鍋、濟鍋、蘇源環保、武漢凱迪等的合格分供方。為國內各大鍋爐廠配套300MW、600MW及1000MW機組電站鍋爐項目。產品業績遍布全國二十八個省、市、自治區，并出口印度、印尼、越南、泰國、馬來西亞等東南亞國家。

產品咨詢

聯系我們

產品詳情

HXYR-5型空預器吹灰器

　　HXYR-5型吹灰器是以蒸汽或空氣作為吹灰介質，專門用于吹掃回轉式空氣預熱器受熱面積灰的吹灰器。HXYR-5型吹灰器的吹灰槍管、槍管上的噴嘴口徑及布置間距根據不同的空預器和安裝要求專門設計。運行時，吹灰槍管只作伸縮運動，而回轉式空預器作旋轉運動，因此，每個噴嘴的吹灰軌跡是數圈阿基米德螺旋線，幾個噴嘴一起，完成對整個空氣預熱器的吹掃。噴嘴噴出的氣流有一定擴散角，噴射覆蓋面寬度隨噴嘴到空預器扇形板的距離不同而變化。通常，噴嘴距扇形板的距離為200毫米時，覆蓋面寬約64毫米，而當距離為300毫米時，覆蓋面可達95毫米。
　　HXYR-5 type soot blower is a soot blower that uses steam or air as the blowing medium and is specifically used to blow ash from the heating area of a rotary air preheater. The soot blowing gun barrel, nozzle diameter on the gun barrel, and arrangement spacing of the HXYR-5 soot blower are specially designed according to different air preheaters and installation requirements. During operation, the soot blowing gun barrel only performs telescopic motion, while the rotary air preheater performs rotational motion. Therefore, the soot blowing trajectory of each nozzle is a few turns of Archimedean spiral, and several nozzles work together to complete the blowing of the entire air preheater. The airflow emitted by the nozzle has a certain diffusion angle, and the width of the spray coverage varies with the distance from the nozzle to the fan plate of the air preheater. Usually, when the distance between the nozzle and the fan-shaped plate is 200 millimeters, the coverage surface width is about 64 millimeters, while when the distance is 300 millimeters, the coverage surface can reach 95 millimeters.

主要技術參數：
Main technical parameters:
吹灰器行程：根據合同要求
Soot blower stroke: according to contract requirements
吹灰管移動速度：根據合同要求
Movement speed of soot blowing pipe: according to contract requirements
吹灰介質：蒸汽或壓縮空氣
Soot blowing medium: steam or compressed air
吹灰壓力：～1.5MPa
Soot blowing pressure:~1.5MPa
有效吹灰半徑：～2M
Effective blowing radius:~2M
噴嘴數量及口徑：根據合同要求決定
Number and diameter of nozzles: determined according to contract requirements
電動機（中國國內使用）：ASR-6324 B5型0.18KW
　　　　　　　　　　　　1370rpm.380V.50Hz.3P
Electric motor (for domestic use in China):
ASR-6324 B5 type 0.18KW
1370rpm.380V.50Hz.3P
近似重量：360kg+每米行程116kg
Approximate weight: 360kg+116kg per meter of travel

主要零部件
Main components
1.跑車與電動機(減速機)
1. Sports car and electric motor (reducer)
2.吹灰器閥門（提升閥）及反法蘭
2. Soot blower valve (lift valve) and counter flange
3.梁體
3. Beam body
4.墻箱(與鍋爐接口)
4. Wall box (interface with boiler)
5.動力電纜
5. Power cable
6.爐內吹灰管
6. Furnace soot blowing pipe
7.前托架（支撐吹灰槍）
7. Front bracket (supporting the soot blower)
8.內管
8. Inner tube
9.爐內支撐架
9. Furnace support frame
10.電氣箱與行程控制（前、后限位開關）
10. Electrical box and travel control (front and rear limit switches)

上一個：

HXG-5型固定旋轉式吹灰器

下一個：

HXTW-5型測溫探針

產品咨詢

產品名稱：

相關產品

HXG-5型固定旋轉式吹灰器

湖北華信機械發展有限公司專業從事各類鍋爐吹灰器、冷渣器、閥門管道系統、工業控制系統及其他輔機設備的設計開發、生產制造與檢修服務。

Hubei Huaxin Machinery Development Co., Ltd. specializes in the design, development, production, manufacturing, and maintenance services of various boiler soot blowers, slag coolers, valve piping systems, industrial control systems, and other auxiliary equipment.